Dryer Repair Cost in Roswell, GA
When a dryer stops heating, stops tumbling or takes forever to dry, the fix is usually one worn part. This guide shows typical estimated price ranges for common electric and gas dryer repairs, what affects the bill and how to decide between repair and replacement. Your exact price comes after a diagnosis, with an upfront quote before repair begins.

Thermal fuses, thermostats, belts, elements and rollers, labor included.
Drive motors and control boards.
A new dryer, before delivery, hookup and haul-away.
Prices on this page are typical estimated ranges for the Atlanta area, including common parts and labor. They are not quotes or guarantees. Your price depends on your model, the part that failed and its availability, and you get an upfront quote before repair begins.
Typical dryer repair costs by problem
Estimated totals including parts and labor, not including the diagnostic visit. They are a planning range, not a quote.
Heating element (electric)
The usual cause when an electric dryer tumbles but the clothes stay damp and cool.
Thermal fuse or thermostat
Safety parts that cut heat or power. They often fail because of a restricted vent.
Gas igniter or valve coils
A gas dryer that runs without lighting usually needs one of these.
Drive belt
A dryer that hums but the drum will not turn often has a broken belt.
Drum rollers or idler pulley
Squealing, thumping or a rough-turning drum.
Drive motor
A dryer that will not start, or starts and quits.
Control board or timer
Dead controls, cycles that will not advance or no response to buttons.
Ranges are typical estimates for the Atlanta area and are not guaranteed. A clogged vent is a common hidden cause of repeat failures.
What changes the cost of a dryer repair
A few things decide whether your dryer lands at the low or high end of the range.
Electric or gas
Gas dryers add ignition and valve parts, which are priced differently from electric elements.
Which part failed
A belt or fuse is a smaller job than a motor or control board.
Vent condition
A blocked vent can trip safety parts again and again. Clearing it may be part of the fix.
Brand and model
Part prices and how hard the dryer is to open vary by manufacturer.
Stacked or tight installs
Stacked units and closets can add labor time.
Age of the dryer
Older dryers may have more than one worn part.
Repair or replace your dryer?
Dryers are simple machines, which usually makes repair a good value. Compare the quote with a new dryer to be sure.
Repair usually makes sense when
- The dryer is under about 10 years old
- The fault is a fuse, thermostat, belt, roller, element or igniter
- The quote is well under half the price of a comparable new dryer
- The vent is clear so the failure will not repeat
Replacement is worth comparing when
- The dryer is past roughly 10 to 13 years old
- The quote is near or above half the cost of a new dryer
- The motor and control board have both failed
- Heating parts keep failing even with a clear vent
How a dryer repair quote works
The price comes before the repair.
Tell us what it does
Does it tumble but not heat, or not turn at all? Give us the brand and model.
Diagnosis on site
A technician tests heating, ignition, motor and safety parts, and checks airflow through the vent.
Upfront quote
You see the repair cost before any work begins.
You decide
Approve the repair or choose to replace.
Frequently Asked Questions
Straightforward answers about pricing, diagnostic fees, and appliance repair costs in Roswell.
Prices are typical estimates for general information only and are not a quote, offer or guarantee. Roswell GA Appliance Repair is an independent repair service and is not affiliated with any appliance manufacturer.



